The Army is accelerating plans to build early prototype components for its futuristic Next-Generation Combat Vehicle for the 2030s and beyond – a lighter weight, deployable high-tech armored vehicle platform to control nearby robots, fire new weapons and outmatch future Russian and Chinese tanks.

While the particular configuration and technology woven into the new combat vehicle is in the early phases of conceptual exploration, there is widespread consensus that the future armored platforms will be able to sense and destroy enemy vehicles and drones at much further ranges, make use of active protection systems, leverage emerging artificial intelligence and command and control systems, use more automation and – perhaps of greatest significance – fire lasers and the most advanced precision weaponry available.

Senior Army leaders tell Warrior Maven that the NGCV program – is being massively sped up. The acceleration of NGCV prototyping is strongly supported in the new 2019 budget request which seeks $119 million for the program.

The revved-up effort is likely to evolve into a family of vehicles to fight alongside or succeed the Abrams tank, Bradley Fighting Vehicle and Stryker among other armored platforms.

Development of the new armored vehicles is being pursued in alignment with the Army’s shifting modernization strategy, an effort which places a higher premium on more rapidly prototyping and testing platforms, weapons and technologies; the idea is to access the best of the “realm of the possible” when it comes to weapons and technology and circumvent some of the bureaucratic challenges known to encumber traditional Army acquisition approaches.

Recommended: America Has Military Options for North Korea (but They're All Bad)

Recommended: 1,700 Planes Ready for War: Everything You Need To Know About China's Air Force

Recommended: Stealth vs. North Korea’s Air Defenses: Who Wins?

“In the past, we would have spent many years and hours toiling away trying to write down requirements for the system and then fight over the fine points of that system. Then we pour a lot of money in shaping those requirements and then you become bound by them,” Maj. Gen. John Ferrari, Director, Program Analysis and Evaluation, G-8, told Warrior Maven in an interview.

Ferarri explained that specific cross-functional team leads have begun to explore concepts, technologies and early possibilities for the NGCV effort to, among other things, look for common, cross-fleet technologies, integrate weapons and build in flexibility.

“We are taking time to hone in on what is possible by building prototypes, not the final system. You start tweaking the variables in the near term rather than waiting,” Ferarri said.

Engineering methods now being explored for the vehicle reflect a growing recognition that rapid development, while still measured and intended to ensure the highest quality, is necessary to keep pace with rapid global technological change. More specifically, adaptation of new technologies as they become available is increasingly taking on new urgency in light of current Russian and Chinese armored vehicle modernization efforts.

The Army’s 2015 Combat Vehicle Modernization Strategy specifically cites concerns about Russia’s use of advanced weapons and armored vehicles in Ukraine.

“The Russians are using their most advanced tanks in the Ukraine, including the T-72B3, T-80, and T-90. All of these tanks have 125mm guns capable of firing a wide range of ammunition, including antitank/anti-helicopter missiles with a six-kilometer range, and advanced armor protection, including active protection on some models,” the strategy writes.

In essence, early exploratory efforts seek to engineer a technical foundation sufficient to accommodate future technologies – and maximize weapons, sensors and computers likely to be available for combat in the 2030s. This could include new sensors, sights, electronics, force tracking systems, a range of C4ISR technology and a special emphasis on computer processing, automation and AI.

“We are taking a different approach, much more like silicon valley. We will start with assumptions, then we will prototype and experiment to validate and test the assumption or hypothesis,” Ferarri explained.

This rapid-prototyping Army approach exemplifies the strategic epicenter of the now emerging Army Futures Command.

“We are trying to have a command focused upon what the future might hold and driving technology and concepts. We are having sessions with outside experts and inside leadership,” Ferarri told Warrior Maven.

Ferarri specified that some of the early NGCV prototyping will look at ways to adapt or improve upon existing upgraded armored vehicle platforms. In fact, Army developers have indicated that the configuration of the new vehicles may resemble hull forms of an Abrams, Mobile Protected Firepower vehicle, Bradley or even elements of a Stryker vehicle.

The Army’s “Far-Term” strategic emphasis, aimed at the 2031 to 2046 timeframe according to Army strategy papers, heavily depends upon an Armored Brigade Combat Team’s “ability to ability to deploy rapidly while improving the formation's mobility, protection and lethality. As the ABCT fields new systems, it will replace main battle tanks, howitzers and mortar indirect fire platforms.”

A fleet of similarly engineered vehicles would be designed to both allow for each vehicle to be tailored and distinct, while simultaneously improvement maintenance. logistics and sustainment by using many common parts; the objective would, of course, be to lower long-term life cycle costs and extend the service life of the vehicles.

Army developers also explained that the service is doing some early developmental work assessing lighter weight armor and hull materials able to provide the same protection as the current vehicle at a much lower weight.

“We could look at some novel material such as lightweight tracks or a hull replacement,” Lt. Col. Justin Shell, the Army's product manager for Abrams, told Warrior Maven in an interview last Fall.

Weight, speed and mobility characteristics are deemed essential for a tank’s ability to support infantry units, mechanized armored units and dismounted soldiers by virtue of being able to cross bridges, rigorous terrain and other combat areas less accessible to existing 70-ton Abrams tanks.

“The vehicle needs to have physical adaptability and change and growth ability for alterations as one of its premises - so it can learn things about energy and power and armor. The Army really needs to think about growth as an operational need,” Rickey Smith, Deputy Chief of Staff, G-9, Training and Doctrine Command told Warrior Maven in an interview.

Abrams & Robotic Wingmen

Army senior developers also tell Warrior Maven that it is conceivable future armored vehicles may indeed include an unmanned turret as well as various level of autonomy, tele-operation and manned-unmanned teaming.

Accordingly, future NGCV vehicles will be designed to incorporate advanced digital signal processing and machine-learning, such as AI technologies.

Computer algorithms enabling autonomous combat functions are progressing at an alarming rate, inspiring Army and General Dynamics Land Systems developers to explore the prospect of future manned-unmanned collaboration with tank platforms. It is certainly within the realm of the technically feasible for a future tank to simultaneously control a small fleet of unmanned robotic “wing man” vehicles designed to penetrate enemy lines while minimizing risk to soldiers, transport ammunition or perform long-range reconnaissance and scout missions.

In fact, Army modernization strategy documents specifically cite autonomy enabled platforms, speed and maneuverability as fundamental to future armored warfare.

“As the armored BCT fields new systems, it will replace main battle tanks, howitzers, and mortar indirect fire platforms. Far-term initiatives aim to solve the absence of the armored BCT’s ability to deploy rapidly. The Army assesses the feasibility and application of autonomous or semi-autonomous sub-systems, manned and unmanned teaming, and autonomy enabled combat platforms,” the Army documents read.

Levels of autonomy for air vehicles, in particular, have progressed to a very advanced degree – in part because there are, quite naturally, fewer obstacles in the air precluding autonomous navigation.

GPS enabled way-point technology already facilitates both ground and air autonomous movement; however, developing algorithms for land based autonomous navigation is by all means far more challenging given that a vehicle will need to quickly adjust to a fast-moving, dynamic and quickly-changing ground combat environment.

“Ground combat autonomy is the hardest level of autonomy possible – you are talking about a terrain that is shifting all the time,” Ferarri told Warrior Maven.

Weapons for the Next-Generation Combat Vehicle

The Army cancelled its plans for a future Ground Combat Vehicle, largely for budget reasons, however some of its innovations, technologies and weapons systems are informing this effort to engineer a new tank for the future.

Design specs, engineering, weapons and other innovations envisioned for the GCV are now being analyzed for application in future armored vehicles. In particular, the new tank may use an emerging 30mm cannon weapon planned for the GCV – the ATK-built XM813.

The XM813, according to Army developmental papers, is able to fire both armor-piercing rounds and air-burst rounds which detonate in the air in proximity to an enemy in defilade, hiding behind a rock or tree, for example.

The computer-controlled and electronically driven weapon can fire up to 200 rounds per minute, uses a dual-recoil firing system and a semi-closed bolt firing mode, Army information says.

Greater automation, when it comes to sensor data organization, ammunition loading and even some weapons functions, can reduce the hardware footprint, lower weight and improve crew survivability.

Introduction